Portable cap sealing Lepel CS Plus Jr
The portable CS Plus Jr provides dependable, versatile cap sealing in a convenient, hand-held device designed specifically for low production applications and laboratory development programs.
This user-friendly, cost-efficient method for applying induction seals includes a simple, multi-function LCD display and its performance may be enhanced through a range of optional equipment — including a stand and conveyor sealing head.
The CS Plus Jr cap sealing system delivers strong, tamper-evident seals that prevent leakage and ensure integrity for a range of products, including food, pharmaceuticals, beverages, cosmetics, solvents, petroleum products and chemicals.
Input Voltage 95-245 V AC 50/60 Cycle Phase 1 Power Rating 1kW at 110 V AC 1.2kW at 220 V AC Ambient Temperature Range 32-97°F (0-36°C) Height 12″ (30 cm) Width 7″ (18 cm) Depth 9.5″ (24 cm) Weight 12 lb. (5.5 kg) Cap Size Seals closures from 5mm to 120mm, inc. specialty
Induction cap sealing Lepel CS Plus Jr H2C
The CS Plus Jr H2C offers the most versatile, cost-effective induction cap sealing for applications ranging from single caps to low volume conveyor lines.
The power supply features a simple, multi-function LCD display. In addition, it automatically detects and adjusts for the sealing head that is attached, making it extremely easy to go from using one of four available hand-held sealing head options to using the conveyor sealing head on the stand.
The CS Plus Jr H2C delivers strong, tamper-evident seals that prevent leakage and ensure integrity for a wide range of products, including food, pharmaceuticals, beverages, cosmetics, solvents, petroleum products and chemicals.
Input Voltage 95-245 V AC 50/60 Cycle Phase 1 Power Rating 1kW at 110 V AC 1.2kW at 220 V AC Ambient Temperature Range 32-97°F (0-36°C) In-Line Head: Length 20.25″ (51.4 cm) Width 12.5″ (31.7 cm) including heat sink Height 5″ (12.7 cm) Weight 44.25 lb. (20.1 kg) Stationary Stand: Weight 80 lb. (39.29 kg) Adjustable from floor to bottom of sealing head Min 34″ (86.4 cm) Max 54″ (13.72 cm)
Self-cooled induction cap sealing system Lepel CS Plus 200ss
The CS Plus 200ss is a modification of our first patented self-cooled induction cap sealing system to allow for higher line speeds, while providing outstanding sealing performance in a unit that is shipped ready to roll up to your line and plug in.
The cost-efficient CS Plus 200ss accommodates most line speed requirements across a broad range of industries, sealing 5mm to 120mm caps at moderate to high line speeds. Its easy-to-use controls allow users to enter a variety of settings.
Input 230VAC 10 Amps 50/60 Hz 1 phase Line Speed Moderate to high Cap Size 5 to 120mm Weight 175 lbs. Crated Weight 225 lbs. Height Max 80″ Height under Sealing Head Min 40″ Max 60″ Footprint 30″ x 32″
Cap Inspection System
Detects all typical fault conditions on a conveyor line during the capsealing process. It is designed to detect foil presence and bottle alignment in high speed conveyor applications.
This product can be adjusted to inspect a large variety of bottle sizes and shapes.
When a defective bottle is detected, the Cap Inspector provides an ejector signal to drive an ejector solenoid or relay.
The features of the Cap Inspector are as follows:
- Foil Detect
- Raised Cap
- Cocked Cap
- Bottle Down
- Eject Signal
- Set up menu password protection
- Accumulated fault alarm
- Line idle/Line stopped alarm
- Auto configure
- Four relay outputs:
- Monitoring On
Self learning Auto Configure feature
2 x 20 LCD Display with backlight
3 Status LEDs
Universal supply voltage 95-250V AC
Lepel Capless Sealing LCS-11
The LCS-11 system is the easiest, most consistent way of sealing individual bottles and containers for low volume applications. Traditionally, cap sealing is a non-contact process, but the LCS-11 uses direct contact to automatically seal containers with aluminum disk covers via a fixed parallel sealing head. Receive consistent results on a wide range of bottles even with non-concentric lid placement. No manual application of caps prior to seal.
- • Minimum Container Height — 1.5” (38mm)
• Minimum Container Diameter — 1” (25mm)
• Maximum Container Height — 10” (250mm)
• Maximum Container Diameter — 5” (125mm)
• Cap Size — 5mm – 120mm
• Width — 22.5”
• Height — 15.6”
• Depth — 12”
• Weight — 35 lbs
• Input Voltage— 110-240 VAC, 50/60 Cycle